Experiment 4 - New Baby Girl Card

A friend from work had a baby in January, and I found the perfect (totally impractical) gift for her. These shoes from pink2blue on Etsy are breathtakingly gorgeous in person.

I saw them long after BabyT was too big for them, so I was glad to have another person to buy them for. Those gorgeous shoes could only be presented with an equally cute card, so I worked hard on this one. It was a great project because I just sat down one evening and decided I was going to make it, and finished it in one sitting. That's what I love about making cards - they can be completed in a short time.

MATERIALS

• Blank A2 ivory card and envelope
• Coordinating shades of pink cardstock, plain and patterned
• Cardstock letter stickers
• Adhesive metal faux brads - Jo-Ann Fabric and Craft
• Burgundy/gold embossing powder
• Tsukineko Brilliance Ink Pad, Coffee Bean
• Martha Stewart Adhesive / Art and Craft Glue

TOOLS

• Stampin' Up Welcome Baby rubber stamp
• Fiskars Alpine pattern decorative scissors
• Fiskars paper trimmer
• Martha Stewart Hydrangea Punch
• Uchida Jumbo Craft Punch, 1.5" Circle
• Fiskars 1/4-Inch Corner Squeeze Paper Punch
• Ranger Heat It Craft Tool
• Scotch ATG714 Adhesive Applicator for 1/4-Inch Tape

METHOD
1. I cut strips of patterned and plain pink cardstock to fit the width of the card, in different heights, and used the decorative scissors on the piece at the bottom.

2. I stamped 'Welcome Baby' in brown pigment ink onto plain pink cardstock cut in a circle, then quickly poured on embossing powder and tapped to remove excess. I used a paintbrush to get rid of the stray bits (as well as I could), then hit it with the heat tool for a few minutes until the powder melted and became shiny.  It's a pretty dramatic change, so keep going if you don't see it happen.

3.  I mounted the embossed circle onto a dark pink patterned circle, and then mounted that onto a square of textured cardstock with 3 of the 4 corners rounded (I didn't want to be too symmetric!).

4.  Using the double-sided tape, I attached all of the paper strips to the front of the card, then the embossed piece.  I spelled out 'ELLA' using the cardstock stickers, and then used craft glue to stick the hydrangea cutouts to the card.

5.  The card didn't quite look "complete" so I added a row of faux brads along the top strip of paper.
SUMMARY

I'm quite pleased with how this turned out.  I had to restrain myself from using a ton of different pink patterned papers (I've got quite a stash) and stuck with the very cool crown print from my friend Jenn's scrap pile, and then a very subtle dark pink floral for one of the circles under the 'Welcome Baby' stamp.

I obviously can use some practice embossing - there were still stray bits of powder that wouldn't come off, making the design look a little "fuzzy" after embossing.  I tried using a plastic tray to easily recover the leftover powder, but it was very sticky plastic so I ended up just throwing out a bunch of it.  Next time, a plain piece of paper might work better.

The inside of the card was too plain - I probably should have used a bit of the patterned paper to tie it together a bit more.  Also, I cut out all the pieces first so I could move them around to find the best layout.  It's hard for me, because I get anxious to just finish it, but it's really better to save the tape and glue for the last step so I can make last-minute design changes.

My friend J liked the card and the shoes, so it's all good.  Thoughts from the Peanut Gallery?  Was this too traditionally girly?

Experiment 3 - Congratulations Card for the New Mama-To-Be

We have all been sick here for the past couple of weeks, passing around the same cold that came from BabyT's daycare.  It came back for me with a vengeance yesterday and I'm only just awake enough to string a couple of words together for a post.  If it's totally incomprehensible, that's the Nyquil talking.

I've got a running list of folks for whom I need to make New Baby cards and it's growing.  I love having specific people to make cards for - it helps me narrow the design options down and tailor it just for them. 

This one was for my friend N, who is about to have her 4th child (a boy).   I got her a Starbucks card, remembering her love of coffee when we worked together, and figuring that she probably had enough stuff for the baby by now.  Sometimes the mama needs a present too!  I got inspiration from a 2010 Cards magazine example that had a pocket for a coffee card. I selected the patterned paper first, to guide the color palette for the rest of the card.



MATERIALS

• Blank blue A2 card base and envelope


• Making Memories Just Chillin' Specialty Paper 8x8 - 1 sheet of lovely ombre gingham


• Jo-Ann white cursive letter rub on transfers


• Flower jewels


• K & Co Adhesive Rhinestones


• Prima cork flower embellishment


• Scrap olive green cardstock


• Sassafrass Lass chipboard stickers - numbers


• Tsukineko Brilliance Ink Pad, Coffee Bean


• Martha Stewart Adhesive / Art and Craft Glue


• Copic Atyou Spica Glitter Pen Set

TOOLS

• K-I Memories Congratulations clear acrylic stamp


• Apple Pie Memories Stamp Blocks


• Fiskars paper trimmer


• Scotch ATG714 Adhesive Applicator for 1/4-Inch Tape

METHOD

1. Using the paper trimmer, I trimmed the gingham paper just smaller than the card base.   I used the trimmed piece to create a pocket for the gift card - cut to slightly smaller than the width of the card.  I stamped the pocket with the 'congratulations' stamp inked lightly with the Tsukineko ink and put aside to dry.


2. I used the individual rub on letters to spell 'mama' on a circle cut from the olive cardstock then added the chipboard '4' sticker to the circle.


3. Now it was time to glue - yippee!  I used my Scotch tape runner to tape the gingham piece to the front of the card. I ran the tape on the sides and bottom of the smaller piece and taped it to the inside of the card, to make a pocket for the gift card.


4. I glued the 'mama' circle to the front of the card, slightly off center, and added a cork flower with an adhesive rhinestone to the edge. With the craft glue, I added four flower jewels to the bottom of the card in a random pattern.


5. I wrote my message with my wonderful glitter pens (they deserve their own post later!), put the Starbucks gift card in the pocket, wrote 'handmade by anandi' on the back, then left the card to dry for 24 hours.

SUMMARY

I was pretty happy with how this turned out, given that I had limited time to complete it.  I like that cards can be quick projects and once I decide on the basic color scheme, I just have to find a few embellishments to dress it up.   My fabulous husband suggested making the card in portrait orientation rather than landscape, when I found that it looked a little empty in landscape.  So hooray for getting a second set of eyes on it before gluing the bits together.

Cutting out the individual rub-on letters was a good idea, to get the right positioning.   I definitely did well by not gluing anything until I was happy with the placement.  Paperclips might be helpful to try out different layout ideas and not lose little pieces.

I stayed up too late working on this the first night, so I left it without gluing anything.  Coming back to it the second day was easier - I had some new ideas about placement and felt a little more inspired.  So taking a break can be a good thing, even with a deadline looming.  In my case, the "deadline" was lunch with N the next day.  At a certain point, one has to declare the project "done" - I could have messed with it longer, with only incremental improvements.  Cards are good for this too, since eventually you have to give it away to your recipient. 

Your thoughts?

Experiment 2 - Baby Birthday Party Banner

As part of BabyT's first birthday papercraft festivities, I wanted to create one of those cool birthday pennant banners.  But all the ones I've seen online were made from fabric, and I didn't have enough time to learn how to sew.  I thought there must be a way to make one from all of the cool scrapbook paper I had.

So I turned to my trusty friend, The Google, and did a little searching. Just entering 'birthday banner' yielded a bunch of shops with very cheapy-looking vinyl banners and some not very helpful websites with duplicated content. Then I got creative and searched on 'birthday banner tutorial paper' and found Katydid and Kid's most excellent tutorial.  Since she already has lovely pictures and step by step instructions, I'm keeping mine short. 

MATERIALS

• Solid colored cardstock


• Patterned scrapbook paper  (coordinating with each other and the cardstock, but different patterns)


• White 8.5" x 11 printer paper


• Curling ribbon

TOOLS

• Martha Stewart Crafts Circle Cutter


• Glue stick


• Crayola Crayons 96 Count - yippee


• Martha Stewart Crafts Circle Cutter

METHOD

 

1. I searched on dafont.com to find a cute outline font that had upper and lowercase letters.  That site is truly addictive so set a timer, or you'll find yourself still looking at fonts three hours later.  


2. I entered the text into Microsoft Word and increased the size so it would print two letters per page.  I cut out each letter. (Tedious!)


3. Using the circle cutter, I cut 6" circles from the cardstock - one per letter plus a couple of extras,  and then cut slightly smaller circles from the patterned paper (5 inches-ish).  (Very tedious!)


4. I glued the letters onto the patterned paper, then used double-sided tape to tape the patterned paper to the cardstock circles.


5. I, and my friend Kim who volunteered to help, colored in the letters with the 96-pack of Crayola crayons I've been moving from house to house since college.  I was glad to finally use them for something!  I suppose BabyT will eventually inherit them, so it's all good.


6. I punched two small holes in each circle, and used curling ribbon to tie them together.  I finally learned how to use a butter knife to make the ribbons curl, and was mildly successful in getting cute ribbon curls between each letter.


7. I drafted the help of my fabulous husband to hang the banner in our living room, using thumbtacks and embroidery floss.  Everytime T saw it she would point and giggle.

[caption id="attachment_94" align="aligncenter" width="513" caption="top photo by Kristi Lloyd Photography"][/caption]

 



SUMMARY and LESSONS LEARNED
This was another project that wasn't technically complex, but took me several days to complete it. Being a mama really cuts down on my uninterrupted crafting time!

• This time I did use the 'assembly line' system and cut all letters, then all circles, then glued, etc. That made the process go a lot faster. I'd definitely spend less time browsing for fonts - I think I ended up back at one of the first ones I chose anyway.


• I would have done a better job at coordinating the papers and the crayon colors with each other - I got too much of an eclectic mix of colors and patterns.  I was trying to avoid being too "matchy matchy", but as a result, it didn't come out very cohesive.  Maybe limiting it to a few colors would have been a good start.


• Next time I might think about printing the letters in color, or using my fancypants Silhouette SD machine to cut the letters out of colored cardstock.  The coloring was fun, but unnecessary.

I've repurposed the banner so that the 'happy' part is hanging in my craft room, and I plan to hang up the 'Trillian' part in her room.  Is this something you might try making?

Stalking my mailbox for craft supplies

Another little known source of craft supplies is my mailbox!

Nah, I'm not talking about something as cool as repurposing junk mail, though I do that for backings on my GeekMagnets.

It's just that with a toddler, going to the craft store is not the relaxing, solitary pursuit it used to be.  Her new trick is to repeat "Mama, all done" when she's tired of whatever we're doing.  I heard it many times today at the grocery, the bookstore, and in the car.  It's cute, but also just a tiny bit stressful, because I can't tell if it's going to turn into a huge meltdown and then therapy when she's 30 because her mama dragged her all over town to find the best deal on patterned paper. 

 So now I order things online after Miss Baby goes to bed. On a side note, hooray for a baby that goes to bed willingly at 6:30pm, to allow mama more online shopping/supply stalking/crafting time!

[caption id="attachment_82" align="aligncenter" width="514" caption="Photos by nycole.etsy.com and scrapnick.etsy.com"][/caption]

So what am I waiting for now, with bated breath?  That's right, more paper.  Because a girl can always use more paper, right?  To be precise, I'm waiting for 550 sheets of paper, from two different shops on Etsy.  Again, it's an assortment, so I'm not sure what I'm getting, but I can't wait to go through it.

And my paper-lovin' friend Jenn will benefit from it too, because she often likes the stuff I don't for her scrapbooks.  So hooray for paper!  Of course, I'll post photos of the good stuff when it arrives. 

But right now, I'm being very diligent about checking the mail and following the USPS tracking website.  Is it here yet?  How about now?  Now?

Experiment 1: Baby First Birthday Invitation Card

BabyT's first birthday was approaching, and this crafty mama wanted to *make* stuff.  The first project of course, was the invitations for her baby friends to come to our party.

Having never made a card before, I just figured I'd buy some supplies and sort it out.   After rejecting a dog pawprint theme because I just couldn't figure out how I wanted it to look, I settled on an outdoor scene for the card.  When I was a kid, my limited drawing abilities meant that I always drew pretty much the same thing, until I gave up drawing entirely:  a sun in the upper left corner, some clouds and a blue line representing the sky, and some green grass at the bottom of the page.   On that backdrop, I'd add a house or a tree, if I was feeling adventurous.

So my vision was to have a sun, cloud and green grass on a blue card.  I also had super-cute photo stickers of BabyT that I wanted to use.  More on those in a future post!  My brilliant husband came up with the idea of just having cupcakes hanging out in the grass.   Keep in mind that this was my first cardmaking experiment, so it bears a striking resemblance to an elementary school art project.

MATERIALS

• Cards and envelopes - Seashore color scheme, Jo-Ann Fabric and Crafts


• Glittery white cardstock


• Shimmery brown cardstock


• Corrugated navy blue cardstock


• Yellow, bright green, pink, cream plain cardstock


• Adhesive jewels - K & Co.


• Photo stickers - moo.com


• Epson High-Gloss Photo Paper, 4 x 6


• Flower and polka dot cardstock stickers


• You're Invited rub-on transfers - Martha Stewart Crafts


• Acid free glue stick

TOOLS

• Uchida Jumbo Craft Punch, 1.5" Circle


• Uchida Extra Jumbo Craft Punch, Flower


• Fiskars 1/4-Inch Corner Squeeze Paper Punch


• Sharp scissors


• Fiskars Hole Punch, 1/8-Inch


• Zig Zag decorative edge scissors - Fiskars


• Paper trimmer - Fiskars


• Ruler

METHOD

1. I rounded the corners of a blue card with the corner rounder.


2. I cut out a strip of green cardstock as wide as the card for the grass, and then cut "fringe" into it with the scissors, and tried to make it look random, which was harder than it seems!  I also rounded the bottom right corner of these pieces to line up with the card edges.


3. I punched a large circle and several tiny circles for the sun from yellow cardstock with the Jumbo circle punch and the small hole punch.


4. I cut the cupcake "cups" from the navy corrugated cardstock.  This took a while because they had to be balanced trapezoids.  I used a ruler, and when I finally got a nice one, I used it as a template to trace the others. 


5. I punched several large circles from the cream, brown and pink cardstock to make the cupcake tops.  I cut them in half with the decorative scissors to get an edge that looked like fancy frosting.  (use your imagination and squint a lot!)


6. I used the jumbo flower punch on the white glitter cardstock to make the clouds, by lining up the card stock about 2/3 way down the punch to get the top part of the flower.  Pretty cool, huh? These clouds remind me of the ones you see in the old 8-bit Super Mario Brothers game.  Yeah, I'm that old.


7. After fretting about the design some more, I got brave and decided to start gluing.  There was no turning back at that point.  First to be glued was the "grass".  I lined up the bottom and rounded right edge, then cut the overhang off where it met the card fold after gluing it on.  I then "ruffled" the grass to give it a bit of texture and make it seem more 3-D.  Because I'm awesome like that. 


8. I glued the circle for the sun in the upper left corner of the card, and then cut the overhang to match the card corner.  I glued the tiny circles around the sun, which was a royal pain with a glue stick


9. I used the glue stick to glue the cupcake cups in different spots on the grass, and then topped them with a cupcake top with some overlap.  This also gave it a 3-D look since the corrugated cardstock was so heavy.


10. The fun part!  I added some adhesive jewels and stickers to the cupcakes, and put the baby photo sticker in the sun.  I also added the 'You're Invited' rub-on in the bottom right corner after cutting it out from the frou-frou border Martha had designed it with.


11. I was shooting for 10 steps.  Oh well.  I printed the invitation info on glossy photo paper using my trusty (cheap) Epson inkjet printer.  I rounded the corners and used double-sided tape to attach it to the inside of the card.  And of course, another baby photo sticker.

SUMMARY AND LESSONS LEARNED

This was a pretty simple project but since it was my first, it took a LONG time.  Here's what I would do differently if I had to do it again:

• Use a different space from where I do my jewelry metalwork.  You can't do nice papercrafts on a dirty surface, and it's hard to find little cutouts if you have a lot of clutter.


• Round the corners *after* gluing paper together - this way I wouldn't have to be so careful about lining up the edges.


• Use more double-sided tape than glue stick, and a different type of glue for the tiny dots, to make it easier and cleaner.


• Practice with the rub-on transfer before trying it on a card that's already been glued together.  I ended up with a couple of wonky ones but didn't want to remake the entire card.  Or maybe add the rub-on before gluing anything so it's not too late to fix it!


• Be more judicious with the stickers and embellishments and err on the side of minimalism.  I don't feel like I used the baby photo stickers the best way possible - they look like an afterthought.


• Set up an assembly line for cutting and gluing when making several similar cards at once.  I figured this out towards the end of the cutting, but not soon enough to save much time.

Now, let's open it up to the Peanut Gallery (that's you!).  What do you think?  How would you have designed it?  Any tips and tricks for this newbie?